[1]胡美娟,吉玲康,馬秋榮,等.激光增材制造技術及現狀研究[J].石油管材與儀器,2019,5(05):1-6.[doi:10.19459/j.cnki.61-1500/te.2019.05.001]
 HU Meijuan,JI Lingkang,MA Qiurong,et al.Overview of Laser Additive Manufacturing Technology and Status[J].Petroleum Tubular Goods & Instruments,2019,5(05):1-6.[doi:10.19459/j.cnki.61-1500/te.2019.05.001]
點擊復制

激光增材制造技術及現狀研究
分享到:

《石油管材與儀器》[ISSN:2096-0077/CN:61-1500/TE]

卷:
5
期數:
2019年05期
頁碼:
1-6
欄目:
綜述
出版日期:
2019-10-20

文章信息/Info

Title:
Overview of Laser Additive Manufacturing Technology and Status
文章編號:
2096-0077(2019)05--0001-06
作者:
胡美娟吉玲康馬秋榮池強
中國石油集團石油管工程技術研究院,石油管材及裝備材料服役行為與結構安全國家重點實驗室 陜西 西安 710077
Author(s):
HU Meijuan JI Lingkang MA Qiurong CHI Qiang
CNPC Tubular Goods Research Institute, State Key Laboratory for Performance and Structure Safety of Petroleum Tubular Goods and Equipment Materials, Xi′an, Shaanxi 710077, China
關鍵詞:
激光增材制造3D打印金屬材料
Keywords:
laser additive manufacturing 3D print metal material
分類號:
V235.1
DOI:
10.19459/j.cnki.61-1500/te.2019.05.001
文獻標志碼:
A
摘要:
基于增材制造技術的發展和分類,對目前金屬增材制造最可靠和可行的方法——激光增材制造技術的原理、激光選區熔化成形技術和直接沉積技術的發展現狀進行了介紹,分析了其未來的發展趨勢,為激光增材制造在國內各個領域的應用提供技術支持。
Abstract:
Based on the development and classification of additive manufacturing technology, the principle of laser additive manufacturing technology was introduced, which is the most reliable and feasible methods for metal additive manufacturing. The status of selective laser melting(SLM) and direct laser deposition(DLD) was introduced and the development trend was analyzed. This paper provides technical support for the application of laser additive manufacturing in various fields in China.

參考文獻/References:

[1] ASTM-International, ASTM Standard F2792-12a: Standard Terminology for Additive Manufacturing Technologies, 2012.
[2] 盧秉恒, 李滌塵. 增材制造(3D打。┘夹g發展[J]. 機械制造與自動化, 2013, 42(4): 1-4.
[3] HULL C W. Apparatus for production of three-dimensional objects by stereolithography. US Patent, US4575330 A,1986-03-11.
[4] DECKARD C. Method and apparatus for producing parts by selective sintering. US Patent 4863538, 1986-10-17.
[5] MEINERS W, WISSENBACH K D, GASSER A D. Shaped body especially prototype or replacement part production. Germany Patent, DE 19649865 C1, 1996-12-02.
[6] JEANTETTE F P, KEICHER D M , ROMERO J A , et al. Method and System for Producing Complex-shape Objects: US Patent, 6046426. 2000-04-04.
[7] LIU W P, DUPONT J N. Fabrication of functionally graded TiC/Ti composites by laser engineered net shaping. Scripta Mater, 2003, 48(9): 1337.
[8] DAVE V R, MATZ J E, EAGAR T W. Electron beam solid free-form fabrication of metal parts[C]. . Proceedings of the 6th Solid Freeform Fabrication Symposium. Austin, USA, 1995:64-71.
[9] TAMINGER K M B, HAFLEY R A. Electron Beam Freeform Fabrication: A Rapid Metal Deposition Process[C]. . Proceedings of the 3rd Annual Automotive Composites Conference, Troy: Society of Plastics Engineers, 2003:1-6.
[10] ANDERSSON LARS ERIK, LARSSON M. Device and arrangement for producing a three-dimensional object.US Patent 2004 /0026807 A1, 2004-02-14.
[11] MURR L E, GAYTAN S M. Electron Beam Melting[J]. Comprehensive Materials Processing, 2014, 10: 135-161.
[12] WANG F D, WILLIAMS S, COLEGROVE P, et al. Microstructure and Mechanical Properties of Wire and Arc Additive Manufactured Ti-6Al-4V[J]. Metallurgical and Materials Transactions A, 2013, 44:968-977.
[13] 徐濱士,董世運,朱勝,等.再制造成形技術發展及展望[J]. 機械工程學報,2012,48(15) :1 -8.
[14] 王華明,張述泉,王向明.大型鈦合金結構件激光直接制造的進展及挑戰[J]. 中國激光,2013,42(4) : 1-4.
[15] 黃衛東,林鑫,陳靜,等.激光立體成形[M]. 西安: 西北工業大學出版社, 2007.
[16] 盧秉恒.西安交通大學先進制造[J]. 中國工程科學,2013,15(1) :4-8.
[17] 關橋. 焊接/連接與增材制造(3D打印)[J]. 焊接,2014,58(5) : 1-8.
[18] ScottM.THOMPSON, LINKAN BIAN, NIMA SHAMSAEI, et al.. An overview of direct laser deposition for additive manufacturing Part I: Transport phenomena, modeling and diagnostics[J]. Additive Manufacturing, 2015, 8:32-62.
[19] 王延慶, 沈競興, 吳海全. 3D打印材料應用和研究現狀[J]. 航空材料學報, 2016, 36(4): 89-98.
[20] 林鑫, 黃衛東. 應用于航空領域的金屬高性能增材制造技術[J]. 中國材料進展, 2015, 34(9):684-690.
[21] 林鑫, 黃衛東. 高性能金屬構件的激光增材制造[J]. 航空制造技術, 2015, (10): 684-690,62-68.
[22] 李懷學, 鞏水利,孫帆,等. 金屬零件激光增材制造技術的發展及應用[J]. 航空制造技術,2012, 55(20): 26-31.
[23] 鞏水利, 鎖紅波, 李懷學. 金屬增材制造技術在航空領域的發展與應用[J]. 航空制造技術,2013,56(13): 66-71.
[24] M.L. Griffith, M.E. SCHLIENGER, L.D. HARWELL, et al. Thermal behavior in the LENS process[C]. , Proc. 9th Solid Free. Fabr. Symp., Austin, USA, 1998: 89-96.
[25] V.M. WEERASINGHE, W.M. STEEN. Laser cladding with blown powder[J]. Met. Con-struct.,1987, (19): 581-585.
[26] J.W. SEARS. Solid freeform fabrication technologies: rapid prototypingrapidmanufacturing Int. J. Powder Metall. 2001, (37) : 29-30.
[27] J. MAZUMDER, A. SCHIFFERER, J. CHOI. Direct materials deposition: designed macro and microstructure[J]. Mater. Res. Innovations , 1998, (3): 118-131.
[28] XUE L, ISLAM M. Free-form laser consolidation for production functional metallic components[C]. Proceedings of the Laser Materials Processing Conference, America, 1998:15-24.
[29] GREMAUD M, WAGMIERE J D, ZRYD A, et al. Laser metal forming: process fundamentals[J]. Surf Eng, 1996, (12): 251-259.
[30] GRIffiTH M L, KEICHER D M, ATWOOD C L, et al. Freeform fabrication of metallic components using laser engineered net shaping LENS[C]. Solid Freeform Fabrication Symposium Proceedings,Austin, 1996: 125-133.
[31] MAH R. Directed light fabrication[J]. Adv Mat Proc, 1997, 151: 31-33.
[32] ABBOTT D H, ARCELLA F G. Laser forming Titanium components[J]. Adv Mat Proc, 1998, 153:29-30.
[33] WU X, SHARMAN R, MEI J, et al. Direct laser fabrication and microstructure of a burn-resistant Ti alloy[J]. Mat Des,2002, 23: 239-247.
[34] 曾光, 韓志宇,梁書錦,等. 金屬零件3D打印技術的應用研究[J]. 中國材料進展, 2014, 33(6):376-384.
[35] A. KRATKY. Production of Hard Metal Alloys[P]. US: # US2076952, 1937.
[36] I. HARTER.Method of Forming Structures Wholly of Fusion Deposited Weld Metal[P]. US #US2299747A, 1942.
[37] P.P. MEHTA, R.R. OTTEN, E.B. COOPER. Method and Apparatus for Repairing Metal in an Article[P]. US: # US4743733A , 1988.
[38] W. KONIG, T. CELIKER, H.J. Herfuth, Approaches to prototyping of metallic parts[C]. , 2nd Eur. Conf. Rapid Prototyp. Manuf., UK, 1993:303-316.
[39] 劉業勝, 韓品連, 胡壽豐,等. 金屬材料激光增材制造技術及在航空發動機上的應用[J]. 航空制造技術, 2014,57(10):62-68.
[40] 王華明, 張述泉, 湯海波,等. 大型鈦合金結構激光快速成形技術研究進展[J]. 航空精密制造技術, 2008, 44(6):28-30.

備注/Memo

備注/Memo:
第一作者簡介:胡美娟,女,1981年生,高級工程師,2009年畢業于西北工業大學焊接專業,獲博士學位,現從事石油管焊接的研究工作。E-mail:[email protected]
更新日期/Last Update: 2019-10-25
爱彩彩票安卓 网赚项目是真的吗 股票行情走势 浙江体彩11选5走势图 上海天天彩选4d 股票发行市场 118平特高手论坛 下载游戏棋牌? 黑龙江36选7开奖结果查询 股票下跌的原因 电玩街机捕鱼游戏下